Asus PG279Q Review + Update with new measuring data

#1
The Asus PG279Q Review just had an update with some measuring data as well as optimal OSD Settings.

YouTube Video Review: (Actually only in German)


UPDATE: Very important zum Thema to the topic "the optimal OSD settings".
http://limscave.com/viewtopic.php?f=8&t ... 4a485789ce

Topic about future changes on Lim's Cave measuring data and equipment: viewtopic.php?f=4&t=3

Suggestions, questions, critism, and new ideas? Post them in here.


Measurings Contrast and Brightness
Image


(Luminance adjustment range, blackpoint adjustment range, average contrast ratio, recommended osd brightness on standard preset)
Image


Luminance OSD setting stability:
Image


Brightness to contrast ratio stability:
Image



Performance on default settings

Default Settings PG279Q:
Image


Deviation on default settings: (Ziel = Target, Abweichung = Deviation)
Image


Results on default settings:
Image


Measured whitepoint different presets:
Image



Optimal OSD settings

Settings:
Image


Results:
Image


Deviations:
Image


ULMB

Measurement with constant ULMB pulse width on different brightness settings:
Image


Measurements with constand brightness on different ULMB pulse width:
Image


Note: On ULMB it's hard to calibrate or set the optimal settings, while a colorimeter will not know in which state the backlight strobing is so that colours, colour accuracy and the colour temperature can't be measured exactly.

Who is online

Users browsing this forum: No registered users and 1 guest